If there is no response, continue to press the Play button until the TV or other device you are programming turns off. Now press the reverse button. If the TV or device does not turn back on, continue to hit the reverse button until it does. Press the stop button once the TV has turned back on, this will save the programming settings. Your RCA universal remote is now ready to use. The auto-programming function is not always effective.
If that method did not work, your RCA universal remote came with a codebook. The codebook has thousands of codes from almost every TV manufacturer. Find your TV brand in the codebook. Circle the potential codes.
RCA Universal Codes are numeric and vary in legth depending on the devices brand. Hold down the TV button, the power light will become illuminated. An example code is for an LG Television. If the power light remains illuminated, you have entered the code correctly.
Once the proper code has been entered, release the TV button. Test the various functions, including volume, menu, etc. There are some codes that will only control half of the remote.
Turn on your TV and the device that you want to pair your remote with. Press and hold the Code Search button while pressing the device button that you want to pair. The remote light will blink once then glow steadily. Enter the code using the number pad on your keyboard while holding down the device button. If you are pairing your remote with a DVD player, hold down the DVD button on your remote as you enter the code using the number pad on your remote control.
The light should then turn off when the code has been entered. Test the remote to make sure that all the buttons are working. You will get a rca remote codes booklet along with your remote box. Take is and note the RCA remote code from that. Just note the code. Here I am Taking TV as the device to program. You can easily identify whether you have programmed RCA remote properly or not since indication by the backlit button.
That is the advantage of GE universal remote control. In this method, we need not to enter universal remote code manually, instead RCA remote automatically search code and complete programming.
You can visit official website of rca and there is code finder page. Just select the device brand name from the drop down and the device category.
Note the code and start programming. You can identify the 4 or 5 digit RCA remote code should used from the remote manual. In manual, there is clearly says that which digit codes you need to use when programming. In some RCA remote, you can see this information from the back side of the remote, just below the remote battery location. The item's button will usually have the name of the item for which you want to program the remote written on or under it.
For example, if you're programming your remote for the TV, you would hold down the TV button. Enter the code while holding down the item's button. Use the remote control's keypad to type in the four-digit code that you retrieved from the RCA Remote Code Finder website.
For example, if you're programming the remote for a TV, you would hold down the TV button while typing in the four-digit code from the website. Look for the confirmation flash. If the programming was successful, you'll see the remote control's LED light flash one time. If you see four flashes instead, your remote encountered an error. Try a different code if the website listed more than one possible code for your item.
Try using Code Search mode. Even though your remote control doesn't have a Code Search button, you can enable code searching for any RCA remote. You'll need to do this if you were unable to program your remote for your selected item by entering the code s that you found on the RCA Remote Code Finder page.
Part 3. Release both buttons and wait for your remote control's LED light to stop flashing. Enable the Code Search feature. Hold down the Power button along with the button for the item for which you want to program your remote. Release both buttons when prompted. When your remote control's LED light turns on and stays on, you can release the item's button and the Power button.
This will ensure that the remote enters the codes correctly. Press the "Play" button. Doing so will cause the remote to enter a batch of 10 separate codes into the item for which you're programming it.
Wait for the LED light to stop flashing. Once the LED light stop's flashing, you can proceed. If your item turns off, skip the next step. Repeat pressing the "Play" button until your item turns off. Each time you press "Play", wait for the LED light to stop flashing and then check the item; if the item turns off, continue to the next step. Press the "Reverse" button. It's the "Rewind" arrow on your remote.
This will cause the item to check the last-sent code. Wait for at least two seconds, then check to see if the item turned back on. If it did turn back on, you can skip the next step. Repeat pressing the "Reverse" button until the item turns back on. Make sure you're waiting for at least two seconds between pressing the "Reverse" button and checking the item. Once the item turns back on, you can proceed. Exit Code Search mode. Hold down the "Stop" button until the remote control's light turns off.
You have successfully programmed your RCA remote for your selected item. My TV will turn off, but the volume and channel button won't work.
0コメント